Contact us
HUESKER Synthetic GmbH
Fabrikstraße 13-15
48712 Gescher


Scroll to discover

Retaining wall made simple
with precast concrete

Compared to conventional construction methods, Fortrac Panel system solutions save you construction time through elimination of costly foundations, the rapid construction of the geogrid-reinforced soil body and the simple installation of prefabricated concrete elements. Depending on the requirements, the precast concrete elements can actively contribute to the overall statics of the supporting structure, such as an abutment, or can be attached to the reinforced earth body with a time delay. In active construction, the facing elements are actively loaded by the earth pressure and are both formwork and visible elements at the same time. In the passive system, the geogrid holds the entire earth pressure, and the concrete facing has a purely optical and protective function. A major advantage of the passive construction method is that, in difficult ground conditions, you can wait for possible subsidence and deformation and install the concrete facing with a time delay in relation to the supporting structure. Our engineers will be pleased to support you in designing the back-anchored retaining walls.

System benefits

  • Rapid erection with slender precast concrete panels
  • Cost-effective alternative to concrete-only solutions
  • Less labour and plant requirement
  • Project-specific solutions with structural or purely
    cosmetic/protective facings
  • Tied-back sheet piling as a further option

Our system models

Active model

  • Panels acting simultaneously as formwork and finish
  • Outer skin forming part of structural system
  • Rapid on site erection (also thanks to large intervals between geogrid layers)
  • Fewer geogrids/geogrid layers
  • Connectors can be used to accommodate settlement

Passive model

  • Particularly suitable for settlement-prone soils
  • Freedom from restraint and deformation due to phased installation
  • Minimisation of later settlement, e.g. by advance surcharging
  • Damage to panels has no impact on structural stability
  • Individual panels easily replaceable if damaged

Komponent kit
Everything for your Panel system model

  • Interaction flexible Fortrac geogrid
  • Nonwoven for erosion/wash-out protection
  • Precast-concrete panel without/with cast-in coupling
  • Connectors for active facing
  • Connectors for passive facing
  • Lost or temporary formwork for passive facing

Project Examples

Wide range of applications

Fortrac Panel

Fast bridge construction in just 80 days

Germany | Footbridge over A3 motorway, 36.60 m span

Fortrac Panel

Bridge abutment as active system

Netherlands | 50 m long Wildlife bridge over N261 near Tilburg-Waalwijk

Fortrac Panel

Bridge abutment at Beukbergen wildlife bridge

Netherlands | soil faced by wide, passive concrete panels with highly decorative finish

Fortrac Panel

Flyover bridge in Ajah

Niger | Infrastructure project to promote economic development and quality of life

Fortrac Panel

Traffic interchange on N 62, Sloeweg

Netherlands | Bridge abutment with central pier, complex superstructure with roundabouts etc.

Fortrac Panel

Prinses Amaliaviaduct, Maasvlakte Rotterdam

Netherlands | PVA-geogrid, protection against chemical action from saline environment

Fortrac Panel

Krammer Wind Park with 34 wind turbines

Netherlands | Tied-back sheet piling for rapid

erection directly by water

Fortrac Panel

Temporary bridge abutment for haul road

Switzerland | Rapid erection and dismantling, reuse of all materials

Masting Challenges with Fortrac Systems

Have a look at other system models »

Further information
you can find here